image

About Us

JE Berkowitz, LP is the premier high quality architectural glass fabricator in the United States. As an ISO 9001 certified company, we are committed to excellence and quality in the processing and distribution of glass products to our customers.

Contact Us

  • 1-800-257-78272
  • info@jeberkowitz.com
  • One Gateway Boulevard, Pedricktown, New Jersey
            
Top

J.E. Berkowitz introduces new jeb 3seal hm+ warm-edge spacer

J.E. Berkowitz introduces new jeb 3seal hm+ warm-edge spacer

Pedricktown, N.J., October 9, 2017 – J.E. Berkowitz (JEB) introduced the new JEB 3Seal™ HM+ warm-edge spacer system for insulating glass units (IGUs), which enables bold and energy-efficient architectural glass solutions.

Redesigned to meet the toughest commercial glazing demands, the JEB 3Seal HM+ spacer features triple seal technology, including an improved secondary seal made out of high-modulus silicone, as well as a hot-applied captive polyisobutylene (PIB) primary seal and a pre-applied acrylic adhesive for spacer to glass bonding.

Gary McQueen, director of architectural sales at JEB, said the improved JEB 3Seal HM+ spacer offers significant aesthetic and energy-efficient advantages over traditional IGU spacers.

“The high-modulus silicone secondary seal minimizes PIB migration, providing clear, straight sightlines,” McQueen said. “It also offers 35 percent higher design strength, allowing for a narrower air cavity in an IGU, and 10.4 percent more argon gas retention than standard sealants, based on ASTM 2190 testing. An IGU incorporating the JEB 3Seal HM+ spacer will retain its argon gas longer over other insulating glass systems, maximizing energy savings and extending the units service life.”

While traditional metal spacers are highly conductive, the JEB 3Seal HM+ spacer is made from thermoset structural silicone with integral 3A desiccant, which allows for minimal thermal conductivity, higher edge-of-glass temperatures, and an improved condensation resistance factor. With its T-shaped design, the JEB 3Seal HM+ spacer also offers shock-absorbing properties that counteract glazing stresses caused by wind, snow, driving rain, fluctuating temperatures, and barometric pressure.

For more information on the JEB 3Seal HM+ spacer, visit www.JEBerkowitz.com and download a brochure.

About JEB

J.E. Berkowitz (JEB), a Consolidated Glass Holdings, Inc. (CGH) company (www.cghinc.com), is a leading architectural glass fabricator that is based in Pedricktown, New Jersey, and operates out of a 253,000-square-foot plant. Founded in 1920, the ISO 9001:2015 certified company is committed to excellence and quality in the processing and distribution of architectural glass products, technical support, and LEED® certification assistance. For more information, visit www.JEBerkowitz.com.

#  #  #

Editor’s Notes: 

High-Res photos are available upon request.

JEB 3Seal™ is a trademark of J.E. Berkowitz 

No Comments

Sorry, the comment form is closed at this time.