CNC-Fabrication-Edging

Interior Glass

JE Berkowitz manufactures a wide variety of solutions for the architectural interior glass market. With superior service and design experience, we are able to focus on the customer’s design in creating an environment that will open the space, allowing more light and enhancing the overall working environment. Our precision CNC fabrication and cutting capacity allows for an easy installation while our on-time production helps in keeping the construction intact.

Cutting Tolerances

Glass Thickness – 1/8″ to 3/4″
Cutting Tolerances – ±1/16″
Standard Stock Sizes – 130″ x 204″


Fabrication Guidelines

Maximum Glass Size – 84″ x 142″
Standard Holes 1/4″ to 2-1/2″

Metric Standard Holes

10

20

13

27

16

36

19

40

Countersunk Hole

19

36

20

49

27


Edging Guidelines

Available EdgesGround and Seamed
Mitered Edges22-1/2° and 45°
Minimum Width3-1/2″
Maximum Length170″
Maximum Heightin the Short Edge120″

CNC Fabrication

Table Size87″ x 150″
Countersunkup to 80mm or 3-1/8″
Drilling1/4″ minimum to any size hole
Routing1/4″ to any size
Exterior PolishingAny exterior of 1/4″ 3/8″, 1/2″ 3/4″
Any shape up to a maximum size of 87″ X 150″
Available in Flat polish
Interior PolishingAny interior cutout from 1/2″ minimum radius and up to 87″ x 150″
Available in Flat polish
SpoolingAll cut outs will be spooled on CNC, even if there is no polishing.
Minimum of 1/4″ to 87″ x 150″

View Invisiwall® Glass Systems Products.


Application Use

  • Point Supported Glass Wall Systems
  • Commercial Shower Doors
  • Interior Glass Partitions
  • Sliding Glass Doors
  • Top Hung Sliding Doors
  • Bottom Roller Sliding Doors
  • Glass Swing Doors with Rails
  • Glass Doors with Patch Fittings
  • Custom Etched Glass